I recently went through a significant change in the way I have my photos printed. For about 7 years I produced all my own prints using ink jet printers. First a Canon and then an Epson Stylus PRO 7600 with Ultrachrome ink. I loved that I could be in control of the entire process, print on demand and easily print test proofs. I also thought it was the most cost effective way of printing and that the quality was on par with any print lab.
Within the last year I have had a change of perspective and have now switched over to using a professional print lab to produce all my prints. Two factors contributed to my switch. First, as my 7600 got a couple of years under its belt, combined with the fact that I sometimes go for a couple weeks without printing anything, it began to have issues with ink nozzles clogging, creating banding in my prints. I would then need to spend as much as two hours running the cleaning cycle to clear the nozzles. The time lost, as well as the cost in wasted paper and ink, became a source of stress and frustration. Admittedly, I have many photographer friends who properly maintain their printers and don’t suffer similar issues.
The second factor was my discovery that when printing on coated, non-absorbent papers (referred to as RC papers), such as glossy or semi-gloss, solvents in the inks are not absorbed by the paper and instead evaporate over time. When such a print is framed, the evaporating solvent condenses on the inside of the glass leaving a visible foggy residue. The issue is widely commented on in web forums and the offered solutions include waiting several weeks to frame prints, or to layer newsprint between prints and stack books on them for 48 hours to draw out the solvent. I didn’t have any luck with the newsprint approach, and some other prints that I let cure for a month and a half still fogged the glass when framed. To read an article specifically about the fogging problem click HERE. Much more can be found with a quick Internet search.
The combination of the two problems drove me crazy enough that I began having West Coast Imaging produce all my prints. They aren’t cheap, but the quality is amazing and they deal with maintaining the equipment and stocking paper and ink. Since the evaporation issue isn’t a problem with canvas and fine art papers, I have them print these with their Epson ink jet printer. For all my glossy and semi-gloss prints, I have them use their Chromira printer, which uses traditional chemistry based “wet” printing. In the end, I think that wet printing on glossy paper give superior results in color and contrast and it eliminates the strange reflections created by different ink densities when viewing ink jet prints at an angle. In addition, I like the selection of papers, such as Fuji Crystal Archive and FujiFlex super gloss, that are available with Chromira prints. Most importantly, the prints can be framed right away and don’t leave any residue on glass.
I still think that ink jet printers offer great color and quality and a lot of control and convenience for amateur and professional photographers alike, as long as one has the time and patience to maintain them and the evaporating solvent issue isn’t a concern. If you know anyone who wants to buy a 7600, mine is available for a really good price. I’ll probably get a 13″ ink jet for test prints and printing cards and small prints on matte papers.